Outdoor Proximity Card Reader w/LCD Display

This weatherproof proximity card reader is a perfect access control device for outside doors in factories, office buildings, and other sensitive areas. Maximum distance is approx. 18cm (7 inches). Constructed of tough ABS plastic.

• Big and clear LCD display, 4 lines text, 1024 x 64 pixel graphic
• Unlimited site codes
• 11 sets of time zones
• Different time zone for each user
• Up to 120 holiday schedules
• Auto-show work status (set via time zone edit)
• Master cards range assignable

• RS-485 support for networking (via controller or directly)
• Built-in door sensing and arming inputs (on/off)
• Auto open/close scheduling of doors
• Control mode, card capacity and card type assignable by user directly
• Built-in proximity reader and external Wiegand reader port
• Auto-discriminating between stand-alone & networking system
• Alarm function available (tamper, force entrance, door sense)
• Networking: RS-485, 9600, N, 8, 1
• External reader port: Suitable for all WG, ABA reader, 125K, 13.56M (Mifare) or 2.4G reader
• RF Frequency / Reading range 125 kHz / 10-18cm
• Door relay: 12VDC @ 2A NO/NC/COM 0.1-600 sec. latch type
• Alarm relay: 12VDC @ 2A NO/NC/(jumper) 0.0-600 sec. (COM Common)
• DI input: Egress button / door sensor / card sensor
• Transistor output: Arming / door sensor / card sensor
• Tamper switch limit switch (form C)
• Serial port: supported for AI-401R016, LED display, relay board, printer ETC. (4800, N, 8, 1)
• Made of ABS plastic
• Dimensions: 127mm x 91mm x 46mm (5" x 3.58" x 1.81")
• Connects easily to our ECL-ACC1000.
• Connect to PC using ECL-CN550.